With sand, crushed rock, and gravel glued together with a binder called Bitumen, Asphalt is an excellent option for parking lots, roads, driveways, and similar applications.
Yet many people get confused about how to make the most of it, what are the benefits of Asphalt, why it is better than concrete, and who can be your go-to asphalt contractors in Denver?
The asphalt industry is one of the most popular industries in America: Each year, approximately $30 billion are produced from Asphalt materials, and the sector employs over 400,000 employees, including the construction industry. asphalt contractors in Denver
This article will briefly describe the installation steps, interesting facts about Asphalt, and what factors you must look for before hiring an asphalt contractor in Denver. Let’s get started!
Why Should You Prefer Asphalt Over Concrete?
The major reason behind the preference for Asphalt over concrete is its cost-effectiveness. Though the price varies depending on the project and its constituents’ costs, generally speaking, it is a more budget-friendly solution than concrete.
Asphalt is also considered the quicker and faster solution- allowing short waiting times before the site can be used again. Moreover, it is flexible and less likely to crack.
Each material responds differently to climatic changes and extreme weather conditions, based on which it can be decided which material will be helpful in certain situations. Some Asphalt mixtures are more likely to retain their properties in cold weather conditions, while others show impressive properties at elevated temperatures.
As far as the installation of Asphalt is concerned, it is a prime choice by the contractors as the process is quicker. It is versatile and can be repaired every 3 to 5 years with an occasional repair and seal coat. However, if you hire a professional asphalt contractors in Denver for the job, the site can last about 30 years.
Factors to Look Upon Before Hiring Asphalt Contractors in Denver, CO
Before hiring professional asphalt contractors in Denver for the job, follow these tips to make an informed decision:
- Don’t fall for the scams of the “traveling contractors.” If someone rings your doorbell, claiming to have leftover materials for another job, it’s a scam!
- For amazing services, always sign a contract with bonded, registered, adequately licensed, and qualified companies, like Denver Paving Company.
- Check for the ratings and reviews of the contractors on various platforms to ensure they are the right pick for the job.
- Always get reviews from local references and verify them. Ask references about the working quality, professionalism, and whether they deliver on time. You can evaluate their credibility by viewing their previous working sites.
- Know your budget and negotiate with the contractor accordingly. Pick the Asphalt contractor offering the most affordable packages.
Installation Processes of Asphalt Paving
Asphalt paving requires several steps of demolishing and hauling away the existing surface. Leave it up to the asphalt contractors in Denver to do the job but here is the major stages of the process are:
Step 1: Surface Grading
Grading is the beginning stage before laying down Asphalt. A contractor slopes greasy areas with grading- it helps to keep water from sitting on the surface of the finished Asphalt.
Step 2: Preparation of Sub Base
The next step after grading is putting down the base layer. This is a load-bearing helpful for the supporting. The aggregate materials are the main constituents of sub base. Typically, more than half of the layer is crushed rocks and stones.
Step 3: Binding Layer
Usually, the binding layer is made up of Bitumen. It is mixed with oil to make it stronger and more durable. Once the binding layer is applied, a proof roll is put down. Proof layering is helpful for the detection of soft areas that are not capable of load-bearing. If vulnerable regions are found, the labor digs them deeper and replaces them with a stronger version.
Step 4: Installation of New Asphalt
After the sub-base is fixed and strong enough for the load-bearing, the installation process of new Asphalt is started. The surface is rolled smoothly and compacts with the Asphalt.
As soon as the Asphalt cools down after rolling, it is ready for functioning. Though drying times vary depending on the conditions and materials; however, it is recommended to wait for approximately 24 hours to let it completely dry.
Furthermore, don’t let the cars and trucks too soon on the surface as it might lead to the repair without even using them. The Asphalt’s exposure to sunlight results in oxidation and turns gray from black.
Therefore, it is crucial to stop the oxidation process after curing it. For a commercial parking lot, it is required in 30 days, while a residential driveway can be cured in 90 days.
5 Interesting Facts You Must Know About Asphalt Paving
Before going for Asphalt paving, here are some interesting facts you need to know to make a better decision:
- Suitable Time for Surfacing
According to the experts, summer is the most suitable time for Asphalt surfacing because of the usage of hot mix and warm mix Asphalt in the process. For optimal surfacing, both of these require hot weather. Therefore, if you are planning for the Asphalt pavement, summer, fall, or spring are the best times.
- Seal Coating is an Effective Solution for Asphalt Protection
Though Asphalt is a good option if you require a good resistance against rain and snow, the efficiency will be increased if coupled with the seal coating. It can improve the lifespan of your parking lot or driveway as it helps to reflect the harmful UV rays.
- Proper Maintenance of Asphalt
Alongside seal coating, other maintenance procedures can also help improve the Asphalt’s durability. Asphalt contractors in Denver recommends proper cleaning and regularly carrying out preventive measures allow you to remain free of problems for extended periods.
All Asphalt Contractors are Not Equal!
To enjoy the perks of Asphalt for a longer period, it is necessary to hire a skilled Asphalt contractors in Denver, CO. For the most impressive, amazing, and budget-friendly packages, you must contact the Denver Paving Company.
The company has over 30 years of experience in the industry and understands what it takes to install long-lasting Asphalt pavement. You can discuss the materials and ask related queries to ensure you make the right decision. And trust us, you are picking the best ones in town.
Leave a Reply